论坛 › KNX › KNX USB Interface 330 (Stick)

邢远 发表于 2013-7-7 01:01:19

KNX USB Interface 330 (Stick)

KNX USB Interface 330 (Stick)USB Stick as interface for EIB/KNX

Application areaThe USB Stick provides a bidirectional connection between a PC or Laptop and the installation bus KNX (TP). The USB connection is galvanically isolated from the KNX bus. The interface is compatible with the ETS (Engineering Tool Software) and with the Falcon driver of the KNX Association. The device is thus supported by many visualization programs. In order to connect own software to KNX via this USB interface our cross-platform SDK kDrive is available.Mechanical data
[*]Housing: plastic, transparent
[*]Dimensions: 90 mm x 21 mm x 12 mm
Indicators
[*]Signal LED (green) for USB-connection
[*]Signal LED (green) for KNX connection
Power supply
[*]Power consumption from USB: < 200 mW
[*]Power consumption from KNX: < 100 mW
Connectors
[*]KNX via pluggable screw terminal
[*]USB connector type A
Compatibility
[*]ETS (Engineering Tool Software) ETS3 or later
[*]Falcon Driver (KNX Association)
[*]kDrive (Weinzierl)
Scope of Delivery
[*]Device as stand-alone:
USB Stick device
USB extension cable 10 cm
[*]As Set in plastic case:
USB Stick device
USB extension cable 10 cm
Measuring lines red/black 1 m
Alligator clips red/black
[*]kDrive (Weinzierl)
Download
[*]Data sheet
[*]Product database for ETS2/3 and for ETS4
[*]Software Development Kit (SDK)

李政 发表于 2013-7-7 10:42:21

你敢不敢翻译一下呢？？？

..传说 发表于 2013-7-7 12:56:12

USB接口呗？

lwm178 发表于 2013-7-7 15:27:13

邢工，这是啥？

eagerhawk 发表于 2013-7-7 22:23:37

这个好袖珍啊，不错呀

mgw0814 发表于 2013-7-8 12:59:15

视声也有这样一款

ID徐 发表于 2013-9-25 16:51:50

这个小东西挺好

lxn58 发表于 2014-7-11 09:59:21

恩，我现在用的就是K-bus的，非常方便

查看完整版本: KNX USB Interface 330 (Stick)