标题: Introducing the IntesisBox®: Making automated buildings work harder [打印本页] 作者: 邢远 时间: 2013-3-21 00:49 标题: Introducing the IntesisBox®: Making automated buildings work harder IntesisBox® is a small and robust device that functions as an intelligent gateway and is capable of intercommunication with KNX, BACnet, Modbus, LON, DMX, M-Bus and many other proprietary systems (BMS, HVAC, Lighting, Fire, Intrusion, Energy Management etc). Microcontrolled and easy to install via DIN rail mounting, it features RS232, RS485, Ethernet and Konnex TP1 (EIB) interfaces that are dessigned specifically to offer a range of integrations in a robust and small device with null maintenance.
With this autonomous device it is possible to interconnect directly the internal system (building automation, industrial automation, BACnet, ModBus, Konnex…) to the external system (fire system, access control system, security system, HVAC, cold/warm generation, energy generation & measurement, lighting, hotel management, home automation…). A console RS232 port is also available to connect a laptop PC for programming and monitoring the device. IntesisBox® also offers the possibility to be connected to Ethernet/LAN/WAN networks expanding thus its possibilities with connection to ethernet/IP based protocol systems, remote monitoring, networks interconnection, web server, internet/e-mail alarm sending, SNMP…
Inside its internal structure, the IntesisBox® incorporates a high performance and reliability microcontroller with flash (non volatile) memory where the operating system and integration code (firmware) are saved. This internal structure, along with a watchdog system, ensures a suitable operation of the device every time, even when faced with power irregularities such as micro-cuts or longer power failures. It has no mechanical mobile components (fans, hard discs…), therefore reducing potential malfunctions and maintenance to almost zero, making this ideal device for industrial environments. It allows (depending on the model) the generation and register of datalogs associated to internal variables, useful for example to register historical data for temperature, relative humidity, etc. Thanks to an internal interchangeable lithium battery (with approx. 10 years life time), the internal historical data is stored in case of power failure. The firmware can be also updated via the console port.
IntesisBox® allows DIN rail mounting for easy installation inside an industrial cabinet and allows a wide range of input supply voltage, from 9 to 30VDC and also 24VAC, with a low power consumption of 1.4 watts. The operating temperature range is from -40°C to +70°C and the relative humidity from 5% to 95% (non condensing). It is not necessary to have any external RS232/RS485 converter, because IntesisBox® has RS485 port and can be directly connected to a RS485 bus. IntesisBox® can be also equipped with a Konnex TP1 (KNX/EIB) optocoupled port allowing to be directly connected to any KNX/EIB bus. All available IntesisBox® hardware versions are compliant with RoHS directive (2002/95/CE).
Along with the device, it also comes supplied (free of charge) with the LinkBox software, the software tool that’s needed for configuring and monitoring the IntesisBox®. LinkBox software runs on MS Windows® operating systems and uses a serial port to communicate to the IntesisBox®. It is possible to use LinkBox Software off-line (not connected to IntesisBox®) to configure the IntesisBox® more comfortably in the office and later download the configuration to the device using the serial connection in the field. Also supplied (again, free of charge) is a console cable that’s needed in order to configure the device. This is a standard DB9 male to DB9 female cable. Intesis can also supplied (on demand) an external plug-in power supply (european plug) 230VAC/12VDC 300mA to power the IntesisBox® if required.
The IntesisBox® is available to order now from KNXshop.co.uk in the Communication > Gateways/Convertors section.
About Intesis Software
Intesis Software design and develop interfacing solutions for building automation systems under its own brand and OEM. Since their formation in 2000, the products have been available in more than 10 countries and 3 continents. Their success is due to the reliability and performance of the products and the quality of service provided. To find out more about Intesis and their products, please vist Intesis.com.
