installertooldlg.cpp：源码内容

邢远 · 发表于 2014-9-20 21:06:07

/******************************* InstallerToolDlg.cpp *********************
* #######
* ## ##
* # ## #### ##### ##### ## ## #####
* ## ## ## ## ## ## ## ## ##
* ## # ###### ## ## #### ## ## ####
* ## ## ## ## ## ## ##### ##
* ####### #### ## ## ##### ## #####
* #####
* Z-Wave, the wireless language.
*
* Zensys A/S
* Denmark
*
*
* This source file is subject to the terms and conditions of the
* Zensys Software License Agreement which restricts the manner
* in which it may be used.
*
*---------------------------------------------------------------------------
*
* Description: Implementation file for InstallerTool source code.
* All functionality for the Serial API based installer tool
* should be defined here.
*
* Author: Henrik Holm
*
* Last Changed By: $Author: heh $
* Revision: $Revision: 1.36 $
* Last Changed: $Date: 2005/04/14 11:34:52 $
*
****************************************************************************/
/****************************************************************************/
/* INCLUDE FILES */
/****************************************************************************/
#include "stdafx.h"
#include "InstallerTool.h"
#include "InstallerToolDlg.h"
#include "winver.h"
#include ".installertooldlg.h"
#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif
//Version values
#define PC_VERSION_MAJOR 1
#define PC_VERSION_MINOR 11
/*Number of ms between timer events*/
#define TIMEOUT_TIME 100 /*ms*/
/*Define colors to use BBGGRR*/
#define INVALID_COLOR 0x000000
#define NODE_GT_COLOR 0x00FF99 //Generic controller
#define NODE_ST_COLOR 0x9999FF //Static controller
#define NODE_SB_COLOR 0x660000 //Binary Switch
#define NODE_SM_COLOR 0xFF0000 //Multilevel Switch
#define NODE_SENB_COLOR 0x00AA00 //Binary sensor
#define NODE_SENM_COLOR 0x111111 //Multilevel sensor
#define NODE_MB_COLOR 0XE6E61C //Meter
#define NODE_EC_COLOR 0xAAAAAA //Entry Control
#define NO_NODE_COLOR 0xFFFFFF //No node at this node id
#define NODE_UNKNOWN_COLOR 0x9900FF
#define NODE_BAD_COLOR 0x0000FF //There is a node, but unable to the other node
#define NODE_OK_COLOR 0xFF0000
#define GRAPH_TOPOLOGY_SIZE 512 // The size of the network topologi map in pixels
/* Max number of nodes in a Z-wave system */
#define ZW_MAX_NODES 232
/*Defined used to access m_nodeList display*/
#define ID_FIELD 0
#define NODE_ID_TXT 1
#define DEVICE_TYPE 2
#define TX_COUNT 3
#define REPORT_LEVEL_TIMEOUT 0x01
#define GET_LEVEL_TIMEOUT 0x02
CSerialAPI api;
BYTE nodeType[255];
BYTE lastLearnedNodeID;
BYTE lastLearnedNodeType;
BYTE RoadList[6];
static void *this_instance;
static HWND this_hWnd;
BYTE locateCount;
BOOL replSend;
int selected[255];
BYTE selectCount;
static BYTE routingTable[232][232/8];
BOOL secondaryCtrl;
char uCversion[40];
BYTE bAbortNow = FALSE;
/////////////////////////////////////////////////////////////////////////////
// CAboutDlg dialog used for App About
class CAboutDlg : public CDialog
{
public:
CAboutDlg();
// Dialog Data
//{{AFX_DATA(CAboutDlg)
enum { IDD = IDD_ABOUTBOX };
CString m_txtVersion;
CString m_txtDevVer;
//}}AFX_DATA
// ClassWizard generated virtual function overrides
//{{AFX_VIRTUAL(CAboutDlg)
protected:
virtual void DoDataExchange(CDataExchange* pDX); // DDX/DDV support
//}}AFX_VIRTUAL
// Implementation
protected:
//{{AFX_MSG(CAboutDlg)
//}}AFX_MSG
DECLARE_MESSAGE_MAP()
};
CAboutDlg::CAboutDlg() : CDialog(CAboutDlg::IDD)
{
//{{AFX_DATA_INIT(CAboutDlg)
m_txtVersion = _T("");
m_txtDevVer = _T("");
//}}AFX_DATA_INIT
char str[80];
m_txtVersion.Delete(0,80);
sprintf(str,"PC version: %i.%i",PC_VERSION_MAJOR,PC_VERSION_MINOR);
m_txtVersion.Insert(0, str);
sprintf(str,"Module: %s",uCversion);
m_txtDevVer.Delete(0,80);
m_txtDevVer.Insert(0,str);
}
void CAboutDlg::DoDataExchange(CDataExchange* pDX)
{
CDialog::DoDataExchange(pDX);
//{{AFX_DATA_MAP(CAboutDlg)
DDX_Text(pDX, IDC_STATICVERSION, m_txtVersion);
DDV_MaxChars(pDX, m_txtVersion, 80);
DDX_Text(pDX, IDC_STATICDEV, m_txtDevVer);
DDV_MaxChars(pDX, m_txtDevVer, 80);
//}}AFX_DATA_MAP
}
BEGIN_MESSAGE_MAP(CAboutDlg, CDialog)
//{{AFX_MSG_MAP(CAboutDlg)
// No message handlers
//}}AFX_MSG_MAP
END_MESSAGE_MAP()
/////////////////////////////////////////////////////////////////////////////
// CInstallerToolDlg dialog
CInstallerToolDlg::CInstallerToolDlg(CWnd* pParent /*=NULL*/)
: CDialog(CInstallerToolDlg::IDD, pParent)
{
//{{AFX_DATA_INIT(CInstallerToolDlg)
m_RoutingTable = _T("");
m_intLowNode = 0;
m_intHighNode = 0;
m_uintFrames = 10;
//}}AFX_DATA_INIT
// Note that LoadIcon does not require a subsequent DestroyIcon in Win32
m_hIcon = AfxGetApp()->LoadIcon(IDR_MAINFRAME);
}
void CInstallerToolDlg::DoDataExchange(CDataExchange* pDX)
{
CDialog::DoDataExchange(pDX);
//{{AFX_DATA_MAP(CInstallerToolDlg)
DDX_Control(pDX, IDCANCEL, m_btnQuit);
DDX_Control(pDX, IDC_BUTTON13, m_btnAbortAction);
DDX_Control(pDX, IDC_BUTTON10, m_btnResetTool);
DDX_Control(pDX, IDC_COMBO1, m_cTXLevel);
DDX_Control(pDX, IDC_LQRESULT, m_txtLQResult);
DDX_Control(pDX, IDC_LEGEND, m_legend);
DDX_Control(pDX, IDC_LIST2, m_nodeList);
DDX_Control(pDX, IDC_STATIC4, m_txtNodePoint);
DDX_Control(pDX, IDC_BUTTON9, m_btnResetNode);
DDX_Control(pDX, IDC_BUTTON6, m_btnRecInfo);
DDX_Control(pDX, IDC_BUTTON4, m_btnRestore);
DDX_Control(pDX, IDC_BUTTON3, m_btnBackup);
DDX_Control(pDX, TOPOLOGY, m_btnTopology);
DDX_Control(pDX, IDC_BUTTON8, m_btnAddNode);
DDX_Control(pDX, IDC_BUTTON7, m_btnCheckLink);
DDX_Control(pDX, IDC_BUTTON2, m_btnLocateNode);
DDX_Control(pDX, IDC_BUTTON1, m_btnGetNeighbors);
DDX_Control(pDX, IDC_STATIC2, m_txtHomeId);
DDX_Control(pDX, IDC_STATIC1, m_txtStatus);
DDX_Control(pDX, IDC_ROUTEMAP, m_cstaticNodeMap);
DDX_Text(pDX, IDC_EDIT1, m_uintFrames);
DDV_MinMaxUInt(pDX, m_uintFrames, 1, 32000);
DDX_Control(pDX, IDC_BUTTON12, m_btnHandOverPrimary);
//}}AFX_DATA_MAP
}
BEGIN_MESSAGE_MAP(CInstallerToolDlg, CDialog)
//{{AFX_MSG_MAP(CInstallerToolDlg)
//ON_WM_SYSCOMMAND()
ON_WM_PAINT()
ON_WM_QUERYDRAGICON()
ON_BN_CLICKED(TOPOLOGY, OnTOPOLOGY)
ON_BN_CLICKED(IDC_BUTTON1, OnGetNeighbors)
ON_WM_DRAWITEM()
ON_BN_CLICKED(IDC_BUTTON2, OnLocateNode)
ON_BN_CLICKED(IDC_BUTTON6, OnReplRec)
ON_LBN_SELCHANGE(IDC_LIST2, OnSelchangeList2)
ON_BN_CLICKED(IDC_BUTTON7, OnCheckLink)
ON_BN_CLICKED(IDCANCEL, OnExit)
ON_BN_CLICKED(IDC_BUTTON8, OnAddNode)
ON_BN_CLICKED(IDC_BUTTON9, OnResetNode)
ON_BN_CLICKED(IDC_BUTTON10, OnResetTool)
ON_WM_MOUSEMOVE()
ON_WM_LBUTTONDBLCLK()
ON_EN_CHANGE(IDC_EDIT1, OnChangeEdit1)
ON_CBN_EDITCHANGE(IDC_COMBO1, OnEditchangeCombo1)
ON_WM_TIMER()
ON_BN_CLICKED(IDC_BUTTON12, OnHandOverPrimary)
ON_BN_CLICKED(IDC_BUTTON13, OnAbortButton)
ON_WM_MBUTTONDBLCLK()
ON_WM_ACTIVATE()
//}}AFX_MSG_MAP
#if _MSC_VER >= 1300
ON_MESSAGE(WM_USER+2, (LRESULT (AFX_MSG_CALL CWnd::*)(WPARAM, LPARAM)) EnableUI)
ON_MESSAGE(WM_USER+4, (LRESULT (AFX_MSG_CALL CWnd::*)(WPARAM, LPARAM)) OnReceiveRemoteData)
#else
ON_MESSAGE(WM_USER+2, EnableUI)
ON_MESSAGE(WM_USER+4, OnReceiveRemoteData)
#endif
ON_BN_CLICKED(IDC_BUTTON14, OnBnClickedButton14)
ON_WM_SYSCOMMAND()
END_MESSAGE_MAP()
/*============================ EnableUI ====================================
** Function description
** Enables button presses
**
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::EnableUI()
{
EnableButtons(TRUE);
}
/*============================ AddNode ==================================
** Function description
** Add a node to the internal nodeType table.
**
** Side effects:
** Updates the bMaxNodeID variable.
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::AddNode(BYTE nid, BYTE ntype)
{
BYTE i=255;
nodeType[nid] = ntype;
while((nodeType[i]==0)&&(i>0))
i--;
if(i)
bMaxNodeID = i;
else
bMaxNodeID = 0;
}
/*============================ SetNodeIDText ==============================
** Function description
** Finds the nodeID in the Item list and updates the selected information
** Returns TRUE if success, FALSE if not
** Side effects:
**
**--------------------------------------------------------------------------*/
BOOL CInstallerToolDlg::SetNodeIDText(BYTE nodeID, /*IN nodeid to update*/
BYTE field, /* IN What field we want updated*/
CString txtStr) /*IN String containing the text write*/
{
BOOL retVal = FALSE;
char buf4[4];
int item;
memset(buf4, 0, sizeof(buf4));
lfv.flags = LVFI_STRING; // Search on parmeter
lfv.psz = itoa(nodeID, buf4, 10); /*Find node ID*/
item = m_nodeList.FindItem(&lfv,-1);
if(item!=-1)
{
m_nodeList.SetItemText(item,field,txtStr);
m_nodeList.SetItemText(item, NODE_ID_TXT,itoa(nodeID, buf4, 10));
retVal = TRUE;
}
return retVal;
}
/*============================ ConvertStrtoInt ===========================
** Function description
** Converts a string to an integer
**
** Side effects:
**
**--------------------------------------------------------------------------*/
int CInstallerToolDlg::ConvertStrtoInt(CString UnitIdStrTemp)
{
BYTE Number = 0;
Number = atoi(UnitIdStrTemp);
return Number;
}
/*============================ GetUnitList ================================
** Function description
** GETS a list of selected node ids
**
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::GetUnitList(int *unitList, BYTE *numberUnits)
{
CString UnitIdStrTemp;
int k=0;
memset(unitList, 0, 255);
POSITION pos = m_nodeList.GetFirstSelectedItemPosition();
int nSelectedItem = -1;
for (int i = 0;i < itemIndex;i++)
{
if (pos != NULL)
{
nSelectedItem = m_nodeList.GetNextSelectedItem(pos);
UnitIdStrTemp = m_nodeList.GetItemText(nSelectedItem,1);
unitList[k++] = ConvertStrtoInt(UnitIdStrTemp);
}
}
*numberUnits = k;
}
/*============================ ReloadNodeList =============================
** Function description
** Reloads the node IDs and types from the Device module
** Side effects:
**--------------------------------------------------------------------------*/
BOOL CInstallerToolDlg::ReloadNodeList(void)
{
BOOL bFound = FALSE;
BYTE byNode = 1;
BYTE j,i;
BYTE bVer = 0;
BYTE bCapab = 0;
BYTE bLen = 0;
BYTE bNodes[100];
BYTE HomeId[4];
BYTE NodeId;
NODEINFO nodeInfo;
char txt[40];
bMaxNodeID = 0;
api.MemoryGetID(HomeId, &NodeId);
secondaryCtrl = api.SerialAPI_GetInitData(&bVer, &bCapab, &bLen, bNodes);
/*Reset the nodelist before loading it again*/
for (i=0;i<255;i++)
nodeType[i] = 0;
for (i=0;i<bLen;i++)
{
if (bNodes[i] != 0)
{
bFound = TRUE;
for (j=0;j<8;j++)
{
if (bNodes[i] & (1<<j))
{
sprintf(txt,"Reading %i nodelist",byNode);
m_txtStatus.SetWindowText(txt);
api.ZW_GetNodeProtocolInfo(byNode, &nodeInfo);
nodeType[byNode] = nodeInfo.nodeType.generic;
bMaxNodeID = byNode;
}
byNode++;
}
}
else
byNode += 8;
}
return bFound;
}
/*============================ DisplayStandardItems ==========================
** Function description
** Displays the nodeTable, Home ID and other standard items
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::DisplayStandardItems(void)
{
char buffer[50];
char a[50];
BYTE HomeId[4];
BYTE NodeId;
int item;
char buf4[4];
memset(buf4, 0, sizeof(buf4));
lfv.flags = LVFI_STRING; // Search on text
/*Get homeID*/
api.MemoryGetID(HomeId, &NodeId);
if(bMaxNodeID)
{
for(int i=0;i< bMaxNodeID;i++)
{
lfv.psz = itoa(i+1, buf4, 10); /*Find node ID*/
item = m_nodeList.FindItem(&lfv,-1);
if(nodeType[i+1]!=0)
{
if(NodeId == (i+1))
sprintf(buffer, "This node");
else
sprintf(buffer, "%s",WriteNodeTypeString(nodeType[i+1]));
if (item != -1)
{
SetNodeIDText(i+1,DEVICE_TYPE,buffer);
}
else
{
memset(buf4, 0, sizeof(buf4));
m_nodeList.InsertItem(itemIndex, itoa(i+1, buf4, 10));
m_nodeList.SetItemText(itemIndex, NODE_ID_TXT,itoa(i+1, buf4, 10));
SetNodeIDText(i+1,DEVICE_TYPE,buffer);
itemIndex++;
}
}
else
{ /*No node found here*/
if (item != -1)
{
m_nodeList.DeleteItem(item);
itemIndex--;
}
}
}
if(itemIndex>(bMaxNodeID))
{
m_nodeList.DeleteItem(--itemIndex);
}
}
else /*No nodes in the controller*/
m_nodeList.DeleteAllItems();
sprintf(a,"%02X%02X%02X%02X, NodeId:%dn",HomeId[0],HomeId[1],HomeId[2],HomeId[3],NodeId);
GetInstance()->m_txtHomeId.SetWindowText(a);
GetInstance()->m_txtNodePoint.SetWindowText("...");
GetInstance()->m_txtHomeId.UpdateWindow();
}
void CInstallerToolDlg::RemoveNodeFromList(BYTE bSource)
{
char buf4[4];
memset(buf4, 0, sizeof(buf4));
lfv.flags = LVFI_STRING; // Search on text
lfv.psz = itoa(bSource, buf4, 10);
int nodelst = m_nodeList.FindItem(&lfv,-1);
if (nodelst != -1)
{
m_nodeList.DeleteItem(nodelst);
itemIndex--;
}
}
/*============================ IdleLearnNodeState_Compl ====================
** Function description
** Callback which is called when a node is added or removed by
** a SUC
**
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::IdleLearnNodeState_Compl(BYTE bStatus, /*IN Status of learn mode*/
BYTE bSource, /*IN Source node*/
BYTE *pCmd, /*IN Data*/
BYTE bLen) /*Length of data*/
{
static BYTE lastLearnedNodeType;
if (bLen)
{
NODEINFO nodeInfo;
api.ZW_GetNodeProtocolInfo(bSource, &nodeInfo);
if (nodeInfo.nodeType.basic<BASIC_TYPE_SLAVE)
{
lastLearnedNodeType = nodeInfo.nodeType.basic; /*For now we store the learned basic node type*/
}
else
{
lastLearnedNodeType = nodeInfo.nodeType.generic; /* Store learned generic node type*/
}
}
if (bStatus == UPDATE_STATE_ROUTING_PENDING)
{
GetInstance()->m_txtStatus.SetWindowText("Waiting ...");
}
else if (bStatus == UPDATE_STATE_ADD_DONE)
{
GetInstance()->AddNode(bSource,lastLearnedNodeType);
GetInstance()->m_txtStatus.SetWindowText("Node included ...");
::PostMessage(this_hWnd, WM_USER+2, 0, 0);
}
else if (bStatus == UPDATE_STATE_DELETE_DONE)
{
GetInstance()->RemoveNodeFromList(bSource);
GetInstance()->AddNode(bSource,0);
GetInstance()->m_txtStatus.SetWindowText("Node removed...");
::PostMessage(this_hWnd, WM_USER+2, 0, 0);
}
}
/*============================ CommErrorNotification =======================
** Function description
** Called when a communication error occours between Z-Wave module and
** PC
**
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::CommErrorNotification(BYTE byReason)
{
switch(byReason)
{
case CSerialAPI::COMM_RETRY_EXCEEDED:
GetInstance()->MessageBox("Communication with Z-Wave module was lost while sending command.nCheck the cable and either retry the operation or restart the application.","Error");
break;
case CSerialAPI::COMM_NO_RESPONSE:
GetInstance()->MessageBox("Communication with Z-Wave module timed out while waiting for response.nCheck the cable and either retry the operation or restart the application.","Error");
break;
default:
GetInstance()->MessageBox("Communication with Z-Wave module was lost.nCheck the cable and either retry the operation or restart the application.","Error");
break;
}
}
/*====================== ApplicationCommandHandler =======================
** Function description
** All non protocol RF messages received are handled by this function
**
**
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::ApplicationCommandHandler(BYTE rxStatus,
BYTE sourceNode,
BYTE *pCmd,
BYTE cmdLength)
{
ZW_APPLICATION_TX_BUFFER *pdata = (ZW_APPLICATION_TX_BUFFER *) pCmd;
char txt[80];
switch(*(pCmd+CMDBUF_CMDCLASS_OFFSET))
{
case COMMAND_CLASS_SWITCH_MULTILEVEL:
case COMMAND_CLASS_BASIC:
if(*(pCmd+CMDBUF_CMD_OFFSET)== BASIC_REPORT)
{
}
else if (*(pCmd+CMDBUF_CMD_OFFSET)== BASIC_SET)
{
}
break;
case COMMAND_CLASS_SENSOR_BINARY:
if (*(pCmd+CMDBUF_CMD_OFFSET)== SENSOR_BINARY_REPORT)
{
}
break;
case COMMAND_CLASS_CONTROLLER_REPLICATION:
api.ZW_ReplicationCommandComplete();
break;
case COMMAND_CLASS_POWERLEVEL:
if(*(pCmd+CMDBUF_CMD_OFFSET)==POWERLEVEL_TEST_NODE_REPORT)
{
if(GetInstance()->timerID.eventID)
GetInstance()->KillTimer(GetInstance()->timerID.eventID);
GetInstance()->timerID.eventID = 0;
unsigned int recCount = (pdata->ZW_PowerLevelTestNodeReportFrame.testFrameCountMsb<<8)&0xFF00;
recCount |= pdata->ZW_PowerLevelTestNodeReportFrame.testFrameCountLsb&0x00FF;
sprintf(txt," %d to: %d Frames OK:%i", sourceNode, pdata->ZW_PowerLevelTestNodeReportFrame.nodeId,
recCount);
/*pdata->ZW_PowerLevelTestNodeReportFrame.testStatus*/
GetInstance()->m_txtLQResult.SetWindowText(txt);
GetInstance()->EnableButtons(TRUE);
}
break;
default:
break;
}
}
/////////////////////////////////////////////////////////////////////////////
// CInstallerToolDlg message handlers
/*================================ GetInstance =============================
** Function description
** Used to get the instance
**
** Side effects:
**
**--------------------------------------------------------------------------*/
CInstallerToolDlg *CInstallerToolDlg::GetInstance()
{
return (CInstallerToolDlg *)this_instance;
}
/*================================ OnInitDialog =============================
** Function description
** Called on program startup. Initializes the program and module
**
** Side effects:
**
**--------------------------------------------------------------------------*/
BOOL CInstallerToolDlg::OnInitDialog()
{
CDialog::OnInitDialog();
// Add "About..." menu item to system menu.
// IDM_ABOUTBOX must be in the system command range.
ASSERT((IDM_ABOUTBOX & 0xFFF0) == IDM_ABOUTBOX);
ASSERT(IDM_ABOUTBOX < 0xF000);
CMenu* pSysMenu = GetSystemMenu(FALSE);
if (pSysMenu != NULL)
{
CString strAboutMenu;
strAboutMenu.LoadString(IDS_ABOUTBOX);
if (!strAboutMenu.IsEmpty())
{
pSysMenu->AppendMenu(MF_SEPARATOR);
pSysMenu->AppendMenu(MF_STRING, IDM_ABOUTBOX, strAboutMenu);
}
}
// Set the icon for this dialog. The framework does this automatically
// when the application's main window is not a dialog
SetIcon(m_hIcon, TRUE); // Set big icon
SetIcon(m_hIcon, FALSE); // Set small icon
this_instance = this;
this_hWnd = m_hWnd;
/* Start the Z-Wave initilization*/
/* Find out which port is connected.*/
bMaxNodeID = 0;
PortValue = 0;
libType = 0;
#if _MSC_VER >= 1300
bySpeed = CSerialAPI::SPEED_115200;
#else
bySpeed = CSerialAPI.SPEED_115200;
#endif
lSpeed = 115200;
for (int i = 1; i < __argc; i++)
{
LPCTSTR pszParam = __argv[i];
if (pszParam[0] == '-' || pszParam[0] == '/')
{
++pszParam;
}
if (lstrcmpi(pszParam,"com=1") == 0)
PortValue = 1;
else if (lstrcmpi(pszParam,"com=2") == 0)
PortValue = 2;
else if (lstrcmpi(pszParam,"com=3") == 0)
PortValue = 3;
else if (lstrcmpi(pszParam,"com=4") == 0)
PortValue = 4;
else if (lstrcmpi(pszParam,"com=5") == 0)
PortValue = 5;
else if (lstrcmpi(pszParam,"com=6") == 0)
PortValue = 6;
else if (lstrcmpi(pszParam,"com=7") == 0)
PortValue = 7;
if (lstrcmpi(pszParam,"speed=19200") == 0)
{
#if _MSC_VER >= 1300
bySpeed = CSerialAPI::SPEED_19200;
#else
bySpeed = CSerialAPI.SPEED_19200;
#endif
lSpeed = 19200;
}
else if (lstrcmpi(pszParam,"speed=57600") == 0)
{
#if _MSC_VER >= 1300
bySpeed = CSerialAPI::SPEED_57600;
#else
bySpeed = CSerialAPI.SPEED_57600;
#endif
lSpeed = 57600;
}
if (FindLib(PortValue,bySpeed) == 0)
{
api.Shutdown();
str.Format("This application requires a static controller Z-Wave module connected to the serialport.nnDownload the correct Serial API code to the Z-Wave Module and restart the application.");
}
}
if (__argc < 2)
{
m_txtStatus.SetWindowText("No nodes added to controller");
while((libType != ZW_LIB_INSTALLER) && (PortValue < 8))
{
PortValue++;
FindLib(PortValue,bySpeed);
}
}
if (libType != ZW_LIB_INSTALLER)
{
MessageBox(str, "Error");
OnOK();
return TRUE;
}
else
{
char aa[40];
CString str;
GetWindowText(str);
sprintf(aa," - com%d %ld baud",PortValue,lSpeed);
SetWindowText(str + aa);
}
/*Reload the nodes*/
m_nodeList.SetExtendedStyle( (m_nodeList.GetExtendedStyle()| LVS_EX_GRIDLINES | LVS_EX_FULLROWSELECT |
LVIS_SELECTED | LVS_SHOWSELALWAYS )& ~LVS_EX_TRACKSELECT);
m_nodeList.InsertColumn( ID_FIELD, "Id");
m_nodeList.InsertColumn( NODE_ID_TXT, "Node Id");
m_nodeList.InsertColumn( DEVICE_TYPE, "Device Type");
m_nodeList.InsertColumn(TX_COUNT, "TxCount");
itemIndex = 0;
m_nodeList.SetColumnWidth( ID_FIELD, 0);
m_nodeList.SetColumnWidth( NODE_ID_TXT, 50);
m_nodeList.SetColumnWidth( DEVICE_TYPE, 120);
m_nodeList.SetColumnWidth( TX_COUNT, 50);
if (ReloadNodeList())
{
m_txtStatus.SetWindowText("Nodes copied from Z-Wave module.");
}
EnableButtons(TRUE);
/*Set the node type to Generic controller, NOT listening*/
BYTE ca[1];
APPL_NODE_TYPE appType;
ca[0] = 0;
/* appType.specific = */
appType.generic = GENERIC_TYPE_GENERIC_CONTROLLER;
api.SerialAPI_ApplicationNodeInformation(FALSE,appType, ca, 0 );
/*Set Idle learn mode function.*/
api.ZW_SetIdleNodeLearn(IdleLearnNodeState_Compl);
/*reset timer*/
timerID.eventID = 0;
/* Print the node table */
DisplayStandardItems();
memset(nodeState, 0, sizeof(nodeState));
/*Verify if ApplicationNodeInformation is stored correctly*/
BYTE HomeId[4];
BYTE NodeId;
NODEINFO nodeInfo;
api.MemoryGetID(HomeId, &NodeId);
api.ZW_GetNodeProtocolInfo(NodeId,&nodeInfo);
if(nodeInfo.nodeType.generic!= appType.generic)
{
m_txtStatus.SetWindowText("Incorrect type set for this nodetype. Please reset module");
EnableButtons(false);
m_btnResetTool.EnableWindow(true);
m_btnQuit.EnableWindow(true);
// api.ZW_SetDefault(SetDefault_Compl);
}
return TRUE; // return TRUE unless you set the focus to a control
}
BYTE CInstallerToolDlg::FindLib(int PortValue, BYTE bySpeed)
{
if (api.Initialize(PortValue, bySpeed, ApplicationCommandHandler, CommErrorNotification))
{
libType = api.ZW_Version((BYTE*)uCversion); //Get the lib type and version from module
switch (libType)
{
case ZW_NO_INTELLIGENT_LIFE:
{
api.Shutdown();
str.Format("No Serial API code detected on port: com%d - check serial connections.nThis application requires an Installer version of the Serial APInon a Z-Wave module connected via a serialport.nDownload the correct Serial API code to the Z-Wave Module and restart the application.", PortValue);
}
break;
case ZW_LIB_CONTROLLER_STATIC:
{
api.Shutdown();
str.Format("Controller based serial API code detected on port: com%d.nThis application requires an Installer version of the Serial APInon a Z-Wave module connected via a serialport.nDownload the correct Serial API code to the Z-Wave Module and restart the application.", PortValue);
}
break;
case ZW_LIB_CONTROLLER:
{
api.Shutdown();
str.Format("Controller based serial API code detected on port: com%d.nThis application requires an Installer version of the Serial APInon a Z-Wave module connected via a serialport.nDownload the correct Serial API code to the Z-Wave Module and restart the application.", PortValue);
}
break;
case ZW_LIB_SLAVE_ENHANCED:
{
api.Shutdown();
str.Format("Enhanced Slave based serial API code detected on port: com%d.nThis application requires an Installer version of the Serial APInon a Z-Wave module connected via a serialport.nDownload the correct Serial API code to the Z-Wave Module and restart the application.", PortValue);
}
break;
case ZW_LIB_SLAVE:
{
api.Shutdown();
str.Format("Slave based serial API code detected on port: com%d.nThis application requires an Installer version of the Serial APInon a Z-Wave module connected via a serialport.nDownload the correct Serial API code to the Z-Wave Module and restart the application.", PortValue);
}
break;
case ZW_LIB_INSTALLER:
{
char portstr[8];
sprintf(portstr,"COM%d:",PortValue);
Open(portstr);
sprintf((char *)uCversion,"%s - Installer",uCversion);
}
break;
default:
{
api.Shutdown();
str.Format("This application requires an Installer version of the Z-Wave module connected to the serialport.nnDownload the correct Serial API code to the Z-Wave Module and restart the application.");
}
break;
}
}
return libType;
}
/*============================ OnSysCommand ===============================
** Function description
** System command handler (Prints the About box
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnSysCommand(UINT nID, LPARAM lParam)
{
if ((nID & 0xFFF0) == IDM_ABOUTBOX)
{
CAboutDlg dlgAbout;
dlgAbout.DoModal();
}
else
{
CDialog::OnSysCommand(nID, lParam);
}
}
/*============================ OnPaint ===============================
** Function description
** If you add a minimize button to your dialog, you will need the code below
** to draw the icon. For MFC applications using the document/view model,
** this is automatically done for you by the framework.
**
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnPaint()
{
if (IsIconic())
{
CPaintDC dc(this); // device context for painting
SendMessage(WM_ICONERASEBKGND, (WPARAM) dc.GetSafeHdc(), 0);
// Center icon in client rectangle
int cxIcon = GetSystemMetrics(SM_CXICON);
int cyIcon = GetSystemMetrics(SM_CYICON);
CRect rect;
GetClientRect(&rect);
int x = (rect.Width() - cxIcon + 1) / 2;
int y = (rect.Height() - cyIcon + 1) / 2;
// Draw the icon
dc.DrawIcon(x, y, m_hIcon);
}
else
{
CDialog::OnPaint();
DrawRoutingTable();
}
}
// The system calls this to obtain the cursor to display while the user drags
// the minimized window.
HCURSOR CInstallerToolDlg::OnQueryDragIcon()
{
return (HCURSOR) m_hIcon;
}
/*================================= DoDot ====================================
** Function description
** Paints a scaled square at the relative position given by x and y.
** Assumes that the resolution is pixels*pixels
** Side effects:
**
**--------------------------------------------------------------------------*/
void DoDot(CDC *dc, /*IN Device context pointer to update*/
int x, /*IN relative x position*/
int y, /*IN relative y position*/
COLORREF color, /*IN Fill color*/
int pixels, /*IN x or y number of total pixels for the whole node map*/
int maxNodes) /*IN The number of nodes to make room for in the bitmap*/
{
CBrush bkBrush;
int scale =(int)(((float)pixels)/(float)maxNodes);
int size = scale/2;
int xCenter = scale*x-size;
int yCenter = scale*y-size;
//Create color to use for drawing
bkBrush.CreateSolidBrush(color);
//Set the color
(CBrush*)dc->SelectObject(bkBrush);
dc->Rectangle((xCenter-size),(yCenter-size),(xCenter+size),(yCenter+size));
}
/*============================ IsBitSet =====================================
** Function description
** Checks if a bit is set in a given nodemask
** Side effects:
**
**--------------------------------------------------------------------------*/
BYTE /*RET TRUE if bit is set, FALSE if not*/
IsBitSet(BYTE nodeID, /*IN Node ID to check for*/
BYTE *nodeMask) /*IN Pointer to the nodemask to use*/
{
BYTE retVal = FALSE;
BYTE byteToLookIn = (nodeID-1)/8;
BYTE bitToLookAt = (nodeID-1)%8;
if(((nodeMask[byteToLookIn]>>bitToLookAt)&0x01)!=0)
retVal = TRUE;
return retVal;
}
/*============================ DrawLegend ===================================
** Function description
** Draws a color coded legend which shows the colors attached to
** nodetypes
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::DrawLegend(void)
{
int y;
int scale =sizeof(nodeTypeList)+6;
int size = scale/2;
CStatic *m_test = (CStatic*) GetDlgItem(IDC_LEGEND);
CDC *dc = m_test->GetDC();
CFont font;
//Set the pen and color
font.CreatePointFont(scale*5,"Ariel");
(CFont*)dc->SelectObject(font);
for(y=0;y<sizeof(nodeTypeList);y++)
{
CBrush bkBrush;
bkBrush.CreateSolidBrush(GetNodeColor(nodeTypeList[y],FALSE));
(CBrush*)dc->SelectObject(bkBrush);
int xCenter = scale*1;
int yCenter = scale*y+size;//-(scale/2);
char txt[40];
dc->Rectangle((xCenter-2*size),(yCenter-size+1),(xCenter),(yCenter+size-1));
sprintf(txt,"%s",WriteNodeTypeString(nodeTypeList[y]));
dc->TextOut(xCenter+size,yCenter-size,txt);
}
dc->Detach();
}
/*============================ GetNodeColor ============================
** Function description
** Returns the color associated with a given node ID
** Side effects:
**
**--------------------------------------------------------------------------*/
COLORREF CInstallerToolDlg::GetNodeColor(BYTE nodeID, BOOL useID = TRUE)
{
COLORREF color;
BYTE use;
if(useID)
use = nodeType[nodeID];
else
use = nodeID;
switch(use)
{
case 0:
color = NO_NODE_COLOR;
break;
case GENERIC_TYPE_GENERIC_CONTROLLER:
color = NODE_GT_COLOR;
break;
case GENERIC_TYPE_STATIC_CONTROLLER:
color = NODE_ST_COLOR;
break;
case GENERIC_TYPE_SWITCH_BINARY:
color = NODE_SB_COLOR;
break;
case GENERIC_TYPE_SWITCH_MULTILEVEL:
color = NODE_SM_COLOR;
break;
case GENERIC_TYPE_SENSOR_BINARY:
color = NODE_SENB_COLOR;
break;
case GENERIC_TYPE_SENSOR_MULTILEVEL:
color = NODE_SENM_COLOR;
break;
case GENERIC_TYPE_METER_PULSE:
color = NODE_MB_COLOR;
break;
case GENERIC_TYPE_ENTRY_CONTROL:
color = NODE_EC_COLOR;
break;
default:
color = NODE_UNKNOWN_COLOR;
}
return color;
}
/*============================ DrawRoutingTable ============================
** Function description
** Draws the routing Table from the global array routingTable[][]
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::DrawRoutingTable(void)
{
int x,y;
int nodeToUse=1;
BOOL mirror=FALSE;
CStatic *m_test = (CStatic*) GetDlgItem(IDC_ROUTEMAP);
CDC *dc = m_test->GetDC();
COLORREF color;
CFont font;
CBrush bkBrush;
//Set the pen and color
font.CreatePointFont(60,"Ariel");
(CFont*)dc->SelectObject(font);
/*Clear the rectangle*/
dc->FillSolidRect(-20,-20,GRAPH_TOPOLOGY_SIZE+20,GRAPH_TOPOLOGY_SIZE+20,dc->GetBkColor());
//Draw the topologi from routingTable[][]
if(bMaxNodeID)
{
for(y=1;y<=bMaxNodeID;y++)
{
for(x=1;x<=bMaxNodeID;x++)
{
if(x==y)
{
color = NO_NODE_COLOR;
}
else if(IsBitSet(x,routingTable[y-1]))
{
color = NODE_OK_COLOR;
}
else
{
if(nodeType[x])
color = NODE_BAD_COLOR;
else
color = NO_NODE_COLOR;
}
if(nodeType[y]==0)
color = NO_NODE_COLOR;
DoDot(dc,x,y,color,GRAPH_TOPOLOGY_SIZE,bMaxNodeID);
}
}
/*Draw the legend*/
for(y=1;y<=bMaxNodeID;y++)
{
CBrush bkBrush;
bkBrush.CreateSolidBrush(GetNodeColor(y));
(CBrush*)dc->SelectObject(bkBrush);
int scale =(int)(((float)GRAPH_TOPOLOGY_SIZE)/(float)bMaxNodeID);
int size = scale/2;
int xCenter = 0;
int yCenter = scale*y-(scale/2);
char txt[4];
if(size>10)
size = 10;
dc->Rectangle((xCenter-2*size),(yCenter-size),(xCenter),(yCenter+size));
sprintf(txt,"%i",y);
if((!(y%5))||(y==1))
{
dc->TextOut(-20,yCenter-5,txt);
dc->TextOut(yCenter-5,-10,txt);
}
}
}/*if Max ID*/
DrawLegend();
}
/*============================ OnTOPOLOGY ===============================
** Function description
** Called when the Get Topology button is pressed.
** This function loads the routingtable from the z-wavemodule and
** prints it out
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnTOPOLOGY()
{
//Get the topology from the device module.
//For test purpuse we make a bitmap!
//Get the topology from Z-Wave module
int y;
char txt[20],i;
/*Reload the nodelist from the module*/
DisplayStandardItems();
for(y=1;y<=bMaxNodeID;y++)
{
if(nodeType[y])
{
api.ZW_GetRoutingInfo(y,routingTable[y-1],FALSE,FALSE);
sprintf(txt,"Reading %i",y);
m_txtStatus.SetWindowText(txt);
}
else
{ /*No node here.. Reset values*/
for(i=0;i<(MAX_NODES/8);i++)
routingTable[y-1][i]=0;
}
}
m_txtStatus.SetWindowText("Routing table read!");
DrawRoutingTable();
}
/*============================ TXTestComplete =============================
** Function description
** Callback function for completion of the TX test
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::TXTestComplete(BYTE txStatus)
{
BYTE command[10];
char str[40];
char txt[40];
char count = api.ZW_GetTXCounter();
int s = selected[locateCount-1];
sprintf(str,"%i",count);
if (txStatus != TRANSMIT_COMPLETE_OK)
{
GetInstance()->m_txtStatus.SetWindowText(OPERATION_FAILED_STR);
sprintf(str,"nACK");
}
GetInstance()->SetNodeIDText(s,TX_COUNT,str);
api.ZW_ResetTXCounter();
if(bAbortNow)
{
GetInstance()->m_txtStatus.SetWindowText("User Aborted");
return;
}
/*Transmit to next in line if any*/
if((locateCount<=selectCount)&&(nodeType[selected[locateCount]]!=0))
{
sprintf(txt, "Transmitting to node: %i", selected[locateCount]);
GetInstance()->m_txtStatus.SetWindowText(txt);
command[CMDBUF_CMDCLASS_OFFSET] = 0;
command[CMDBUF_CMD_OFFSET] = 0;
GetInstance()->EnableButtons(FALSE);
api.ZW_SendData(selected[locateCount++], command, 2,
TRANSMIT_OPTION_AUTO_ROUTE | TRANSMIT_OPTION_ACK, TXTestComplete);
}
else
{
GetInstance()->EnableButtons(TRUE);
GetInstance()->m_txtStatus.SetWindowText(OPERATION_SUCCESS_STR);
}
GetInstance()->m_txtStatus.SetWindowText(str);
}
/*============================ OnCheckLink =================================
** Function description
** Makes a NOP operation to the node selected and updates the TX count
** needed to reach the node.
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnCheckLink()
{
BYTE command[10];
char txt[40];
api.ZW_ResetTXCounter();
bAbortNow = FALSE;
GetUnitList(selected, &selectCount);
if(selectCount!=0)
{
locateCount = 0;
if((locateCount<=selectCount)&&(nodeType[selected[locateCount]]!=0))
{
sprintf(txt, "Transmitting to node: %i", selected[locateCount]);
m_txtStatus.SetWindowText(txt);
command[CMDBUF_CMDCLASS_OFFSET] = 0;
command[CMDBUF_CMD_OFFSET] = 0;
EnableButtons(FALSE);
api.ZW_SendData(selected[locateCount++], command, 2,
TRANSMIT_OPTION_AUTO_ROUTE | TRANSMIT_OPTION_ACK, TXTestComplete);
}
else
m_txtStatus.SetWindowText(OPERATION_FAILED_STR);
}
else
m_txtStatus.SetWindowText(NO_NODES_SELECTED_STR);
}
/*============================ OnGetNeighbors ===============================
** Function description
** Function called when the Get Neighbour button is pressed.
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnGetNeighbors()
{
char txt[40];
GetUnitList(selected, &selectCount);
bAbortNow = FALSE;
if(selectCount!=0)
{
locateCount = 0;
if((locateCount<=selectCount)&&(nodeType[selected[locateCount]]!=0))
{
sprintf(txt,"Getting neighbors for: %i",selected[locateCount]);
m_txtStatus.SetWindowText(txt);
GetInstance()->EnableButtons(FALSE);
api.ZW_RequestNodeNeighborUpdate(selected[locateCount++], GettingRouting);
}
else
m_txtStatus.SetWindowText(INVALID_NODE_SELECT_STR);
}else
m_txtStatus.SetWindowText(NO_NODES_SELECTED_STR);
}
/*============================ OnDrawItem ===============================
** Function description
**
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnDrawItem(int nIDCtl, LPDRAWITEMSTRUCT lpDrawItemStruct)
{
CDialog::OnDrawItem(nIDCtl, lpDrawItemStruct);
}
/*============================ NeighborDiscovery_Compl ====================
** Function description
** Callback function Called when neighbour discovery terminates.
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::NeighborDiscovery_Compl(BYTE bStatus)
{
char outstr[255];
if(bStatus == LEARN_STATE_DONE)
{
GetInstance()->m_txtStatus.SetWindowText("Discovery success");
}
if(bStatus == LEARN_STATE_FAIL)
{
sprintf(outstr, "Failed at Node %d ", selected[locateCount-1]);
GetInstance()->m_txtStatus.SetWindowText(outstr);
}
if (bStatus != LEARN_STATE_ROUTING_PENDING)
{
GetInstance()->EnableButtons(TRUE);
GetInstance()->OnTOPOLOGY();
}
}
/*============================ GettingRouting ==============================
** Function description
** Runs through the selected nodes and updates their neighbour information
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::GettingRouting(BYTE bStatus)
{
char txt[40];
if (bStatus != LEARN_STATE_ROUTING_PENDING)
{
if(bAbortNow)
{
GetInstance()->m_txtStatus.SetWindowText("User Aborted");
return;
}
if(bStatus==LEARN_STATE_DONE)
{
if((locateCount<selectCount)&&(nodeType[selected[locateCount]]!=0))
{
sprintf(txt,"Getting neighbors for: %i",selected[locateCount]);
GetInstance()->m_txtStatus.SetWindowText(txt);
api.ZW_RequestNodeNeighborUpdate(selected[locateCount++], GettingRouting);
}
else
NeighborDiscovery_Compl(LEARN_STATE_DONE);
}
else
{
NeighborDiscovery_Compl(LEARN_STATE_FAIL);
sprintf(txt,"Neighbors for: %i failed",selected[locateCount-1]);
GetInstance()->m_txtStatus.SetWindowText(txt);
}
}
}
/*============================ OnLocateNode ===============================
** Function description
**
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnLocateNode(void)
{
// TODO: Add your control notification handler code here
}
/*============================ OnReplRec ====================================
** Function description
** Called when the replication receive button is pressed.
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnReplRec(void)
{
// TODO: Add your control notification handler code here
unsigned char i;
EnableButtons(FALSE);
m_txtStatus.SetWindowText("Resetting remote ....");
/*Reset local nodelist*/
for(i=1;i<=ZW_MAX_NODES;i++)
AddNode(i,0);
::PostMessage(this_hWnd, WM_USER+4, 0, 0); /*Signal*/
}
/*============================ OnReceiveRemoteData ==========================
** Function description
** Sets the controller in replication receive mode
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnReceiveRemoteData()
{
// ResetTables();
replSend = FALSE;
m_txtStatus.SetWindowText("Remote reset");
api.ZW_SetLearnMode(TRUE,CopyRemoteComplete);
// api.ZW_NewController(NEW_CTRL_STATE_RECEIVE, CopyRemoteComplete);
}
/*============================ CopyRemoteComplete ===========================
** Function description
** Callback function called during replication.
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::CopyRemoteComplete(
BYTE bStatus, // IN Status of learn process
BYTE bSource, // IN Node id of the node that send node info
BYTE* pCmd, // IN Pointer to Node information
BYTE bLen) // IN Node info length
{
bLen = bLen;
pCmd = pCmd;
BYTE bVer = 0;
BYTE bCapab = 0;
if (bStatus == LEARN_MODE_STARTED)
{
/*Disable Abort Button once we are started*/
GetInstance()->m_btnAbortAction.EnableWindow(FALSE);
GetInstance()->m_txtStatus.SetWindowText("Replication started");
}
else if (bStatus == LEARN_MODE_FAILED)
{
GetInstance()->ReloadNodeList();
GetInstance()->m_txtStatus.SetWindowText("Replication failed");
GetInstance()->EnableButtons(TRUE);
GetInstance()->DisplayStandardItems();
api.ZW_ControllerChange(CONTROLLER_CHANGE_STOP_FAILED,NULL);
}
else if (bStatus == LEARN_MODE_DONE)
{
/* if(replSend)
api.ZW_NewController(NEW_CTRL_STATE_STOP_OK, NULL);
*/
api.ZW_SetLearnMode(FALSE,NULL);
GetInstance()->ReloadNodeList();
GetInstance()->m_txtStatus.SetWindowText("Replication complete");
GetInstance()->EnableButtons(TRUE);
GetInstance()->DisplayStandardItems();
}
else
{
GetInstance()->m_txtStatus.SetWindowText("Unknown Callbackstate");
}
}
/*============================ EnableButtons ===============================
** Function description
** This function is used to enable and disable the buttons on the
** InstallerTool
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::EnableButtons(BOOL bEnabled)
{
m_btnRecInfo.EnableWindow(bEnabled);
m_btnRestore.EnableWindow(bEnabled);
m_btnBackup.EnableWindow(bEnabled);
m_btnTopology.EnableWindow(bEnabled);
m_btnAddNode.EnableWindow(bEnabled);
m_btnCheckLink.EnableWindow(bEnabled);
m_btnLocateNode.EnableWindow(bEnabled);
m_btnQuit.EnableWindow(bEnabled);
m_btnResetTool.EnableWindow(bEnabled);
if(secondaryCtrl)
{
m_btnGetNeighbors.EnableWindow(FALSE);
m_btnResetNode.EnableWindow(FALSE);
m_btnAddNode.EnableWindow(FALSE);
m_btnHandOverPrimary.EnableWindow(FALSE);
}
else
{
m_btnGetNeighbors.EnableWindow(bEnabled);
m_btnResetNode.EnableWindow(bEnabled);
m_btnAddNode.EnableWindow(bEnabled);
m_btnHandOverPrimary.EnableWindow(bEnabled);
}
/*Only enable Abort button, Disabling is handled seperatly*/
if(bEnabled==TRUE)
m_btnAbortAction.EnableWindow(bEnabled);
}
/*============================ ===============================
** Function description
**
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnSelchangeList2()
{
// TODO: Add your control notification handler code here
}
/*============================ WriteNodeTypeString ========================
** Function description
** Returns a CString containing a fitting name to the nodetype supplied
** Side effects:
**
**--------------------------------------------------------------------------*/
CString CInstallerToolDlg::WriteNodeTypeString(BYTE nodeType)
{
switch (nodeType)
{
case GENERIC_TYPE_GENERIC_CONTROLLER:
return "Generic Controller";
case GENERIC_TYPE_STATIC_CONTROLLER:
return "Static Controller";
case GENERIC_TYPE_REPEATER_SLAVE:
return "Repeater Slave";
case GENERIC_TYPE_SWITCH_BINARY:
return "Binary Switch";
case GENERIC_TYPE_SWITCH_MULTILEVEL:
return "Multilevel Switch";
case GENERIC_TYPE_SENSOR_BINARY:
return "Binary Sensor";
case GENERIC_TYPE_SENSOR_MULTILEVEL:
return "Multilevel Sensor";
case GENERIC_TYPE_METER_PULSE:
return "Pulse Meter";
case GENERIC_TYPE_ENTRY_CONTROL:
return "Entry control";
case 0: /* No NodeID */
return "No device";
default:
return "Unknown Device type";
}
}
/*=============================== OnExit ===================================
** Function description
** Called when the Quit button is pressed.
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnExit()
{
api.Shutdown();
EndDialog(IDCANCEL);
}
/*============================ OnAddNode =================================
** Function description
** Includes a new node to the network
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnAddNode()
{
m_txtStatus.SetWindowText("Press button on Unit");
EnableButtons(FALSE);
api.ZW_AddNodeToNetwork(ADD_NODE_ANY,SetLearnNodeState_Compl);
// api.ZW_SetLearnNodeState(LEARN_NODE_STATE_NEW,SetLearnNodeState_Compl);
}
/*============================ SetLearnNodeState_Compl ======================
** Function description
** Called when a new node have been added
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::SetLearnNodeState_Compl(
BYTE bStatus, /*IN Status of learn process*/
BYTE bSource, /*IN Node ID of node learned*/
BYTE *pCmd, /*IN Pointer to node information*/
BYTE bLen) /*IN Length of node information*/
{
if(bLen!=0)
{
NODEINFO nodeInfo;
api.ZW_GetNodeProtocolInfo(bSource, &nodeInfo);
/*Only store learned node type when length is != 0*/
if (nodeInfo.nodeType.basic<BASIC_TYPE_SLAVE)
{
lastLearnedNodeType = nodeInfo.nodeType.basic; /*For now we store the learned basic node type*/
}
else
{
lastLearnedNodeType = nodeInfo.nodeType.generic; /* Store learned generic node type*/
}
lastLearnedNodeID = bSource;
}
switch(bStatus)
{
case ADD_NODE_STATUS_LEARN_READY:
break;
case ADD_NODE_STATUS_NODE_FOUND:
/*Disable Abort button*/
GetInstance()->m_btnAbortAction.EnableWindow(FALSE);
GetInstance()->m_txtStatus.SetWindowText("Waiting ...");
break;
case ADD_NODE_STATUS_ADDING_SLAVE:
GetInstance()->m_txtStatus.SetWindowText("Adding slave unit...");
break;
case ADD_NODE_STATUS_ADDING_CONTROLLER:
GetInstance()->m_txtStatus.SetWindowText("Adding Controller unit...");
break;
case ADD_NODE_STATUS_PROTOCOL_DONE:
case ADD_NODE_STATUS_DONE:
api.ZW_AddNodeToNetwork(ADD_NODE_STOP,NULL);
GetInstance()->m_txtStatus.SetWindowText("Node included ...");
GetInstance()->AddNode(lastLearnedNodeID,lastLearnedNodeType);
GetInstance()->DisplayStandardItems();
GetInstance()->ReloadNodeList();
GetInstance()->EnableButtons(TRUE);
break;
case ADD_NODE_STATUS_FAILED:
default:
/*If were not pending, we want to turn off learn mode..*/
GetInstance()->EnableButtons(TRUE);
api.ZW_AddNodeToNetwork(ADD_NODE_STOP,NULL);
GetInstance()->DisplayStandardItems();
GetInstance()->m_txtStatus.SetWindowText(OPERATION_FAILED_STR);
break;
}
}
/*============================ OnResetNode ===============================
** Function description
** Called when the Reset Node button is called
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnResetNode()
{
m_txtStatus.SetWindowText("Press button on Unit");
EnableButtons(FALSE);
api.ZW_RemoveNodeFromNetwork(REMOVE_NODE_ANY,SetLearnNodeStateDelete_Compl);
// api.ZW_SetLearnNodeState(LEARN_NODE_STATE_DELETE,SetLearnNodeStateDelete_Compl);
}
/*============================ SetLearnNodeStateDelete_Compl ================
** Function description
** Callback function for when deleting a node
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::SetLearnNodeStateDelete_Compl(BYTE bStatus,
BYTE bSource,
BYTE *pCmd,
BYTE bLen)
{
switch(bStatus)
{
case REMOVE_NODE_STATUS_LEARN_READY:
break;
case REMOVE_NODE_STATUS_NODE_FOUND:
/*Disable Abort button*/
GetInstance()->m_btnAbortAction.EnableWindow(FALSE);
GetInstance()->m_txtStatus.SetWindowText("Waiting..");
break;
case REMOVE_NODE_STATUS_REMOVING_SLAVE:
case REMOVE_NODE_STATUS_REMOVING_CONTROLLER:
GetInstance()->m_txtStatus.SetWindowText("Node reset..");
GetInstance()->RemoveNodeFromList(bSource);
GetInstance()->AddNode(bSource,0);
case REMOVE_NODE_STATUS_DONE:
GetInstance()->EnableButtons(TRUE);
api.ZW_AddNodeToNetwork(REMOVE_NODE_STOP,NULL);
GetInstance()->DisplayStandardItems();
break;
case REMOVE_NODE_STATUS_FAILED:
default:
/*If were not pending, we want to turn off learn mode..*/
GetInstance()->EnableButtons(TRUE);
api.ZW_AddNodeToNetwork(REMOVE_NODE_STOP,NULL);
GetInstance()->DisplayStandardItems();
GetInstance()->m_txtStatus.SetWindowText(OPERATION_FAILED_STR);
break;
}
}
/*============================ SetDefault_Compl ==============================
** Function description
** Callback function for resetting Z-Wave module
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::SetDefault_Compl()
{
GetInstance()->ReloadNodeList();
GetInstance()->DisplayStandardItems();
GetInstance()->EnableButtons(TRUE);
GetInstance()->OnTOPOLOGY();
}
/*============================ OnResetTool ==================================
** Function description
** Called when Reset Tool button is pressed
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnResetTool()
{
EnableButtons(FALSE);
m_txtStatus.SetWindowText("Resetting Installer Tool..");
api.ZW_SetDefault(SetDefault_Compl);
}
/*============================ OnMouseMove ==============================
** Function description
** Called when the mouse is moved. This place is used to update
** the text associated with the routing table
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnMouseMove(UINT nFlags, CPoint point)
{
CStatic *m_test = (CStatic*) GetDlgItem(IDC_ROUTEMAP);
CDC *dc = m_test->GetDC();
POINT mypoint;
RECT rect;
char txt[100];
if(bMaxNodeID)
{
int scale =(int)(((float)GRAPH_TOPOLOGY_SIZE)/(float)bMaxNodeID);
int xCenter = 0;
int yCenter = 0;
CDialog::OnMouseMove(nFlags, point);
/*Get the coords of static*/
m_test->GetWindowRect(&rect);
mypoint.x = rect.left;
mypoint.y = rect.top;
ScreenToClient(&mypoint);
mypoint.x = point.x-mypoint.x;
mypoint.y = point.y-mypoint.y;
/*Calculate node number*/
xCenter = mypoint.x/scale+1;
yCenter = mypoint.y/scale+1;
if((xCenter>0)&&(xCenter<=bMaxNodeID)&&
(yCenter>0)&&(yCenter<=bMaxNodeID))
{
sprintf(txt,"%s(%i),%s(%i)",WriteNodeTypeString(nodeType[yCenter]),yCenter,
WriteNodeTypeString(nodeType[xCenter]),xCenter);
m_txtNodePoint.SetWindowText(txt);
}
}
}
/*============================ TestNodeSetComplete =======================
** Function description
** Callback function for completion of the TX test
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::TestNodeSetComplete(BYTE command)
{
UINT testFrames = GetInstance()->m_uintFrames;
if (command != TRANSMIT_COMPLETE_OK)
{
GetInstance()->m_txtLQResult.SetWindowText(OPERATION_FAILED_STR);
GetInstance()->EnableButtons(TRUE);
}
else
{
GetInstance()->m_txtLQResult.SetWindowText("Link check started");
GetInstance()->timerID.timeOutCount = testFrames*4,5+1; //Time out in 0.1 sec
GetInstance()->timerID.eventID = GetInstance()->SetTimer(REPORT_LEVEL_TIMEOUT,TIMEOUT_TIME,NULL); //Run it every 100ms
}
}
/*============================ OnLButtonDblClk ==============================
** Function description
** Called when the Left mouse button is double clicked.
** This is used to handle events when doubleclicking the routing table
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnLButtonDblClk(UINT nFlags, CPoint point)
{
CStatic *m_test = (CStatic*) GetDlgItem(IDC_ROUTEMAP);
CDC *dc = m_test->GetDC();
POINT mypoint;
RECT rect;
ZW_APPLICATION_TX_BUFFER command;
if(bMaxNodeID)
{
int scale =(int)(((float)GRAPH_TOPOLOGY_SIZE)/(float)bMaxNodeID);
int xCenter = 0;
int yCenter = 0;
CDialog::OnLButtonDblClk(nFlags, point);
m_test->GetWindowRect(&rect);
mypoint.x = rect.left;
mypoint.y = rect.top;
ScreenToClient(&mypoint);
mypoint.x = point.x-mypoint.x;
mypoint.y = point.y-mypoint.y;
/*Calculate node number, from coord*/
xCenter = mypoint.x/scale+1;
yCenter = mypoint.y/scale+1;
/*If we are within node table then select the nodes in the list box*/
if((xCenter>0)&&(xCenter<=bMaxNodeID)&&
(yCenter>0)&&(yCenter<=bMaxNodeID)&&
(xCenter!=yCenter))
{
EnableButtons(FALSE);
CListBox *m_NodeTable = (CListBox*) GetDlgItem(IDC_LIST2);
m_NodeTable->SetSel(xCenter-1);
m_NodeTable->SetSel(yCenter-1);
command.ZW_PowerLevelTestNodeSetFrame.cmd = POWERLEVEL_TEST_NODE_SET;
command.ZW_PowerLevelTestNodeSetFrame.cmdClass = COMMAND_CLASS_POWERLEVEL;
command.ZW_PowerLevelTestNodeSetFrame.nodeId = xCenter;
if(m_cTXLevel.GetCurSel()!=CB_ERR)
{
timerID.nodeID = yCenter;
command.ZW_PowerLevelTestNodeSetFrame.powerLevel = m_cTXLevel.GetCurSel();
command.ZW_PowerLevelTestNodeSetFrame.testFrameCountMsb = m_uintFrames>>8;
command.ZW_PowerLevelTestNodeSetFrame.testFrameCountLsb = m_uintFrames;
api.ZW_SendData(yCenter,&command.ZW_PowerLevelTestNodeSetFrame.cmdClass,sizeof(ZW_POWERLEVEL_TEST_NODE_SET_FRAME),
TRANSMIT_OPTION_AUTO_ROUTE | TRANSMIT_OPTION_ACK,TestNodeSetComplete);
}
else
{
m_txtLQResult.SetWindowText("Error select Power level");
EnableButtons(TRUE);
}
}
} /*bMaxNodeID*/
}
void CInstallerToolDlg::OnChangeEdit1()
{
// TODO: If this is a RICHEDIT control, the control will not
// send this notification unless you override the CDialog::OnInitDialog()
// function and call CRichEditCtrl().SetEventMask()
// with the ENM_CHANGE flag ORed into the mask.
UpdateData(TRUE);
// TODO: Add your control notification handler code here
}
void CInstallerToolDlg::OnEditchangeCombo1()
{
// TODO: Add your control notification handler code here
}
/*============================ TestNodeGetComplete =======================
** Function description
** Callback function for completion of the TX test
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::TestNodeGetComplete(BYTE command)
{
BYTE i, nodeCount=0;
if (command != TRANSMIT_COMPLETE_OK)
{
GetInstance()->m_txtLQResult.SetWindowText(OPERATION_FAILED_STR);
GetInstance()->EnableButtons(TRUE);
}
else
{
GetInstance()->m_txtLQResult.SetWindowText("Link check started");
/*Calculate timeout in ms.*/
for(i=1;i<=bMaxNodeID;i++)
if(nodeType[i]!=0)
nodeCount++;
GetInstance()->timerID.timeOutCount = 10; //1 secs timeout on this one
GetInstance()->timerID.eventID = GetInstance()->SetTimer(GET_LEVEL_TIMEOUT,TIMEOUT_TIME,NULL);
}
}
/*============================ GetPowerLevelResult =======================
** Function description
** Function to request result of a TX test
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::GetPowerLevelResult(
BYTE nodeID) // Node ID to get result from
{
ZW_APPLICATION_TX_BUFFER command;
command.ZW_PowerLevelTestNodeGetFrame.cmdClass = COMMAND_CLASS_POWERLEVEL;
command.ZW_PowerLevelTestNodeGetFrame.cmd = POWERLEVEL_TEST_NODE_GET;
api.ZW_SendData(nodeID, &command.ZW_PowerLevelTestNodeGetFrame.cmdClass,
sizeof(ZW_POWERLEVEL_TEST_NODE_GET_FRAME),
TRANSMIT_OPTION_AUTO_ROUTE | TRANSMIT_OPTION_ACK,
TestNodeGetComplete);
}
/*============================ OnTimer ===================================
** Function description
** Windows timer handling.. This function handles ON_TIMER events for
** the InstallerTool
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnTimer(UINT nIDEvent)
{
// TODO: Add your message handler code here and/or call default
CDialog::OnTimer(nIDEvent);
if((--timerID.timeOutCount==0))
{
switch(nIDEvent)
{
case REPORT_LEVEL_TIMEOUT:
if(timerID.nodeID)
GetPowerLevelResult(timerID.nodeID);
else
{
m_txtLQResult.SetWindowText("Error undefined node");
EnableButtons(TRUE);
}
break;
case GET_LEVEL_TIMEOUT:
m_txtLQResult.SetWindowText("Error no response");
EnableButtons(TRUE);
break;
}
/*We only support one timer at a time so kill the timer*/
KillTimer(nIDEvent);
}
}
/*============================ OnHandOverPrimary ==========================
** Function description
** This function is called when the user wants to hand over the primary
** controller status to another controller. Typically this would be done
** when the Installation of the network is complete and configured.
**
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnHandOverPrimary()
{
// TODO: Add your control notification handler code here
EnableButtons(FALSE);
replSend = TRUE;
m_txtStatus.SetWindowText("Waiting for Receiving Controller..");
api.ZW_ControllerChange(CONTROLLER_CHANGE_START,SetLearnNodeState_Compl);
// api.ZW_NewController(NEW_CTRL_STATE_CHANGE, CopyRemoteComplete);
}
/*============================ OnAbortButton ==========================
** Function description
** Used to abort selected operations before they have started.
** Button is disabled once a protocol operation is in progress.
**
** Side effects:
**
**--------------------------------------------------------------------------*/
void CInstallerToolDlg::OnAbortButton()
{
// TODO: Add your control notification handler code here
// api.ZW_NewController(NEW_CTRL_STATE_ABORT,NULL);
// api.ZW_SetLearnNodeState(LEARN_NODE_STATE_OFF,NULL);
api.ZW_AddNodeToNetwork(ADD_NODE_STATUS_DONE,NULL);
bAbortNow = TRUE;
EnableButtons(TRUE);
m_txtStatus.SetWindowText("Action Aborted by user");
}
//////////////////////////////////////////////////////////////////////////////
// Following functions are used in the RoadMap file...
//
//
/////////////////////////////////////////////////////////////////////////////
BYTE CInstallerToolDlg::NodeGetType(BYTE NodeNumber)
{
unitType = nodeType[NodeNumber];
if(unitType != 0)
return NodeNumber;
else
return 0;
}
// Find the neighbours used in RoadMap
int CInstallerToolDlg::FindNeighbours(int x, int y)
{
if(IsBitSet(x,routingTable[y-1]))
{
return x;
}
return 0;
}
// Get MaxNodeId for for RoadMap
BYTE CInstallerToolDlg::GetMaxNodes()
{
return bMaxNodeID;
}
void CInstallerToolDlg::Mesh()
{
//Reload the nodelist from the module
for(int y=1;y<=bMaxNodeID;y++)
{
if(nodeType[y])
{
api.ZW_GetRoutingInfo(y,routingTable[y-1],FALSE,FALSE);
}
else
{ //No node here.. Reset values
for(int i=0;i<(MAX_NODES/8);i++)
routingTable[y-1][i]=0;
}
}
}
//void CInstallerToolDlg::PowerOnOff(BYTE *RoadList , BYTE numberUnits,void(__cdecl *completedFunc)(BYTE *txStatus))
void CInstallerToolDlg::PowerOnOff(BYTE *RoadList , BYTE numberUnits)
{
ZW_APPLICATION_TX_BUFFER command;
command.ZW_BasicSetFrame.cmdClass = COMMAND_CLASS_BASIC;
command.ZW_BasicSetFrame.cmd = BASIC_SET;
#if 1
if (nodeState[RoadList[0]])
{
nodeState[RoadList[0]] = 0;
command.ZW_BasicSetFrame.value = SWITCHED_OFF;
}
else
{
nodeState[RoadList[0]] = 1;
command.ZW_BasicSetFrame.value = SWITCHED_ON;
}
#else
command.ZW_BasicSetFrame.value = SWITCHED_ON;
#endif
api.ZW_SendDataMulti(RoadList, numberUnits, &command.ZW_BasicSetFrame.cmdClass, sizeof(ZW_BASIC_SET_FRAME), TRANSMIT_OPTION_AUTO_ROUTE | TRANSMIT_OPTION_ACK , RouteOnCompleted);
}
void CInstallerToolDlg::RouteOnCompleted(BYTE command)
{
}
void CInstallerToolDlg::AllOff()
{
ZW_APPLICATION_TX_BUFFER command;
command.ZW_Common.cmdClass = COMMAND_CLASS_SWITCH_ALL;
command.ZW_Common.cmd = SWITCH_ALL_OFF;
api.ZW_SendData(NODE_BROADCAST, &command.ZW_Common.cmdClass, sizeof(ZW_ALL_SWITCH_OFF_FRAME), TRANSMIT_OPTION_AUTO_ROUTE | TRANSMIT_OPTION_ACK, NULL);
}
void CInstallerToolDlg::SetSUCCompleted(BYTE bStatus)
{
if(ZW_SUC_SET_SUCCEEDED)
GetInstance()->m_txtStatus.SetWindowText("Set SUC Success..");
else
GetInstance()->m_txtStatus.SetWindowText("Set SUC failed");
}
void CInstallerToolDlg::OnBnClickedButton14()
{
// TODO: Add your control notification handler code here
BYTE nodeID = api.ZW_GetSUCNodeID();
if(!nodeID)
while((nodeType[nodeID]!=GENERIC_TYPE_STATIC_CONTROLLER)&&(nodeID<232))
nodeID++;
else
SetSUCCompleted(ZW_SUC_SET_SUCCEEDED);
if(nodeType[nodeID]==GENERIC_TYPE_STATIC_CONTROLLER)
api.ZW_SetSUCNodeID(nodeID,TRUE,FALSE,SetSUCCompleted);
else
m_txtStatus.SetWindowText("No static controller");
}
HANDLE CInstallerToolDlg::Open(char *szComPort)
{
hComm = CreateFile(szComPort, GENERIC_READ | GENERIC_WRITE,0, NULL, OPEN_EXISTING, NULL, NULL);
if (hComm != INVALID_HANDLE_VALUE)
{
CloseHandle(hComm);
}
return hComm;
}

复制代码

资料下载

方案下载

KNX World

素材下载

智育未来

影音资源

hotZ-wave技术智能家居应用全解读

installertooldlg.cpp：源码内容

热心会员

推广达人

宣传达人

灌水之王

突出贡献

优秀版主

荣誉管理

论坛元老

最佳新人

Z-wave技术智能家居应用全解读

!jz_grzx!