智能家居

标题: KNX总线能源能耗管理控制模块 [打印本页]

作者: 追梦赤兔 时间: 2018-8-15 11:31
标题: KNX总线能源能耗管理控制模块

2年前咨询大家KNX/EIB总线能源管理模块，终于出来了，作为回馈分享，欢迎沟通联系！！！

2019年Light+Building展览会在德国法兰克福也会展示

8路能源管理执行器功能与参数

8-CH Energy-Management Switch Actuator

产品应用功能描述:

• 独立控制8 个回路的灯/负载

• 具有手动强切拨盘，继电器具有磁保持功能；

• 延迟开/关功能，计时开关和计时循环开关的功能；

• 状态值查询回复（反馈）功能

• 总线断电时和电压恢复后继电器开关状态的选择功能；（每一路的开关状态设定或者保持）

• 具有场景组合控制功能；

• 具有对每个回路电流、电压、有效功率、功率因数等电力参数的监测功能，根据设置发出监测的实时数据，监测数据超出或者低于设定阀值则向总线发出警报；

• 具有每回路负载的实时能耗（Energy consumption）监测、能耗累计功能，并且能记录能耗开始累计的日期和时间，监测的能耗超出预设的阀值则向总线发出警报；

• 每回路的电流、电压、有效功率、功率因数、电能数据都可以与继电器开关功能结合，进行有效的逻辑策略控制；

8-channel independent control of lights / loads with manual operation by using 20 An magnetic retention relays. Time function of on/off delay, on/off circular and staircase lamp function. Also it has the scene combination control mode. You can set on/off status of each channel when or after the power shutting down. With status value feedback function, each channel can indivisually detect Current / Voltage / Active power / Power factor etc. And the real-time data counted according to settings issued, it gives an alarm to bus if the monitoring data exceeds or falls below the set threshold. It can monitors and counts up the energy consumption of each channel. And it can also records the date and time when energy consumption starts to accumulate. When the energy consumption exceeds the default valve, it gives an alarm to the bus. You can set the logical policy control of the Energy-Management Switch Actuator combining with the data of Current / Voltage / Active power / Power factor / energy consumption. We have 4 channels and 8 channels Energy-Management Switch Actuators. They fully comply with EU safety standards as well as with KNX.

详细参数：Detailed parameters

l 总线电压Bus Voltage：21--30V DC

l 总线电流Bus current：≤ 12 mA

l 总线功耗Bus power consumption：≤ 360mW

l 辅助输入Auxiliary input：110--240V AC (50/60Hz)

l 辅助功率Auxiliary power：≤ 550mW

l 输出开关电流Output switch current：每回路250VAC/channe (50/60Hz) 16A (阻性负载16 An Resistive load)

产品规格尺寸: Product Specification Size

• 外壳材质Shell Material: PA66

• 尺寸size: 92mmX217mmX61.5mm

• 重量weight (approx.): 0.6KG

• 安装Installation Method: DIN导轨式安装Din rail installation

环境要求: Environmental requirements

• 工作温度Operating temperature: -5°C——+45°C

• 存储温度Storage temperature： - 25°C——+55°C

• 运输温度Transport temperature： - 25°C——+70°C

• 相对湿度relative humidity: max 90%

安全性能：Safety performance

• 防护等级Protection Level：(EN60529) IP 20

• 过压保护Overload protection：(EN60664-1) III

• 电网污染Grid pollution：(EN60664-1) 2

• 安全等级Security phase：(EN61140) III

8路KNX能源管理执行器功能与参数